EZ-PD™ ACG1F One-Port USB Type-C Controller

Überblick

One port USB-C controller with integrated VBUS load switch

EZ-PD™ ACG1F (Type-A to Type-C Generation - 1 FET) is a single-port USB Type-C controller that complies with the latest USB Type-C specifications. ACG1F provides a complete USB Type-C control solution for notebooks and desktops. It is used in systems which need to convert legacy Type-A data port to Type-C data port. ACG1F uses Infineon's proprietary M0S8 technology with a 16-bit flash, 32-bit ARM® Cortex®-M0 processor and integrates a Type-C controller (without power delivery) and a VBUS load switch (5 V / 3 A).

ACG1F supports Downstream Facing Port (DFP) only.

  • USB Type-C and Power Delivery 3.0 supporting USB3 and USB4, Thunderbolt, DisplayPort Alternate Mode platforms
  • Integrated Digital Blocks
    • Two timers, counters, PWMs, and up to 23 GPIOs
    • Four SCBs for configurable master/slave I2C, SPI or UART
  • Integrated Analog Blocks
    • VBUS provider load switch (5V/3A)
    • Slew rate controlled turn-on on VBUS path
    • UAB PD 3.0 Fast Role Swap support
    • Integrated high-voltage 20 V-regulator
    • SBU pass through, USB analog mux
    • VBUS-to-CC short protection
    • VBUS-to-SBU short protection
    • VCONN FETs
    • High-side current sense amplifier across 5 mohms
    • High-voltage NFET gate drivers for VBUS consumer path
    • VBUS discharge NFET
  • System-Level Fault Protection
    • Overcurrent, overvoltage, undervolatge, reverse-current and short-circuit protection on VBUS provider path
    • VCONN over-current protection
    • Thermal shutdown
  • Packages: CCG6DF: 96-BGA (6x6 mm) and CCG6SF: 48-QFN (6x6 mm)

 

  1. Watch the Type-C 101 video series
  2. Download the ACG1F datasheet
  3. Refer to CCGx FAQ page and Type-C reference design page
  4. Get your schematics reviewed using the Online Tech Support Case System
Support