Lighting ICs

  • Produkte
  • Highlights
  • Dokumente
  • Boards
  • Simulation
  • Videos
  • Forums
  • Support
  • Software & Tools
  • myInfineon

Smart lighting and power conversion

Infineon delivers innovative, high-performance solutions with best-in-class technologies that can be used in a broad range of lighting applications.

 



ifx-banner-energy-eficiency-175x150 IFX_UrbanFarming_Banner   

Lighting brochure 2016


Application Brochure

Titel Größe Datum Version
3.3 MB 01 Mär 2016 01_00
6.9 MB 19 Mai 2016 01_00
2.5 MB 03 Mai 2017 01_00

Product Selection Guide

Titel Größe Datum Version
22.2 MB 21 Feb 2017 00_00
10.5 MB 03 Nov 2016 01_03

Product Brief

Titel Größe Datum Version
386 KB 26 Apr 2016 01_00
568 KB 20 Okt 2011
168 KB 01 Mär 2016 01_00
435 KB 20 Okt 2011
674 KB 01 Nov 2011 01_00
222 KB 01 Nov 2011 01_00

Application Notes

Titel Größe Datum Version
3.7 MB 18 Mai 2016 01_02
4.7 MB 24 Nov 2016 01_00
1.5 MB 07 Nov 2016 02_00
644 KB 08 Sep 2011 01_00
2.4 MB 11 Apr 2011 01_00
500 KB 31 Okt 2007 01_00
1.2 MB 10 Mär 2014 01_00

Additional Product Information

Titel Größe Datum Version
74 KB 22 Mär 2016 01_00
75 KB 22 Mär 2016 01_00

Evaluierungs-Boards

Board Familie Beschreibung Status
BCR402W 12V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions - 12V supply voltage, 20mA preset LED current  - Footprint for external resistor for adjusting LED current - Footprint for Schottky diodes (can be replaced by jumpers) - 3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG
    on request
    ILD4001 0.7A BOARD LED Driver & Ballast Controller Evaluation Board for high-power LEDs at DC voltage Input using ILD4001
      on request
      BOARD TLD5097 SEPIC LED Driver & Ballast Controller Sepic configurationTo order please contact our sales office or distributor.
      • TLD5097EL
      on request
      DEMOBOARD TLD5045EJ LED Driver & Ballast Controller Buck mode (to order please contact our sales office or distributor)
      • TLD5045EJ
      on request
      ILD4035 24V BOARD LED Driver & Ballast Controller Drive 1W LEDs with the buck LED driver ILD 4035 24V and 12V supply voltage version available 350mA preset LED current Analog voltage and PWM pin for dimming Can be connectec to a string of 1W LEDs
        active and preferred
        EVALLED-ILD6070 LED Driver & Ballast Controller Evaluation board for high-power LEDs using ILD6070
          active and preferred
          DEMOBOARD TLE4242EJ LED Driver & Ballast Controller Constant current source
          • TLE4242EJ
          on request
          EVALLEDICL8105F2 LED Driver & Ballast Controller 40W LED driver demoboard with isolated 0 - 10 V dimming interface using the ICL8105 digital flyback controller and 800V CoolMOS™
          • ICL8105
          not for new design
          EVAL ICB2FL01G LED Driver & Ballast Controller Evaluation board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL01G for 1x54W T5 lamp.
          • ICB 2FL01G
          active and preferred
          DEMOBOARD TLD5095EL VER1 LED Driver & Ballast Controller 1. Boost to GND (default) 2. SEPIC (external components arrangement must be modified) 3. Constant Voltage Mode (external components arrangement must be modified). To order please contact our sales office or distributor
          • TLD5095EL
          on request
          IRPLMB1E
          • IR2520D
          active
          DEMOBOARD TLD2314EL LED Driver & Ballast Controller 3 in/3 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function (to order please contact our sales office or distributor)
          • TLD2314EL
          on request
          APPBOARD TLD5098EL VER1 LED Driver & Ballast Controller Constant Voltage Mode (to order please contact our sales office or distributor)
          • TLD5098EL
          on request
          EVALLEDICL8105E1 LED Driver & Ballast Controller, MOSFET 20 - 80W universal evaluation system for LED driver with contant current output based on the ICL8105 digital single-stage flyback controller and 800V CoolMOS™
          • ICL8105
          • IPD80R1K0CE
          • SPA17N80C3
          not for new design
          COOLDIM_PRG_BOARD LED Driver & Ballast Controller Configuration Board for CDM10V
            DEMOBOARD TLD1313EL LED Driver & Ballast Controller 1 in/3 out - Open Load and Short Circuit diagnosis ( to order please contact our sales office or distributor)
            • TLD1313EL
            on request
            TLD5541-2QV DEMO V1 LED Driver & Ballast Controller TLD5541-2QV Sepic/B2g + B2B demoboardTo order please contact our sales office or distributor.
            • TLD5541-2QV
            on request
            TLD5190 VOLT DEMO LED Driver & Ballast Controller H-Bridge mini voltage regulator demoboard (w/o SPI)To order please contact our sales office or distributor.
            • TLD5190QV
            on request
            EVAL ICB2FL03G LED Driver & Ballast Controller Evaluation board for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL03G
            • ICB 2FL03G
            active and preferred
            BOARD TLD5097 B2G LED Driver & Ballast Controller Boost to Ground configurationTo order please contact our sales office or distributor.
            • TLD5097EL
            on request
            BCR402W 24V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions - 12V supply voltage, 20mA preset LED current  - Footprint for external resistor for adjusting LED current - Footprint for Schottky diodes (can be replaced by jumpers) - 6 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG
              on request
              REF-XDPL8220-U100W LED Driver & Ballast Controller, MOSFET Efficient and flickerfree reference circuit design with high power factor and low THD, Universal input voltage for 100W output power.
              • CDM10V
              • CoolMOS CE
              • CoolMOS P7
              • XDPL8220
              active and preferred
              BCR320U HW LED BOARD LED Driver & Ballast Controller The BCR 320U is the only dedicated 0.5W LED driver on the market. BCR 320U demoboard features: 24V supply voltage Constant LED current of 150mA BAS 007A-RPP Schottky diode for reverse polarity protection- 6 x 0.5W LEDs, type: OSRAM Advanced Power Topled
                active and preferred
                TLD5541-1QV DEMO V2 LED Driver & Ballast Controller TLD5541-1QV MultiCh Demo with onboard uCTo order please contact our sales office or distributor.
                • TLD5541-1QV
                on request
                IRPLCFL8U Featuring IRS2530D DIM8™ HVIC ballast controller . Drives 1 x 32W Spiral CFL Lamp. Input Voltage: 120Vac. High Frequency Operation. Lamp Filament Preheating. Lamp Fault Protection with Auto-Restart. Low AC Line/Brownout Protection.
                • IRS2530DPBF
                active
                EVAL ICB2FL02G LED Driver & Ballast Controller Evaluation board for dimmable fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x26W TC-TEL lamp.
                • ICB 2FL02G
                active and preferred
                APPBOARD TLD5098EL V7 SEPIC Configuration with EMC filter (to order please contact our sales office or distributor)
                • TLD5098EL
                on request
                IRPLHID2A Featuring IRS2573DSPbF HID Ballast Control IC. Drives 1 x 70W HID lamp. Input voltage range: 185-265 VAC. High Power Factor / Low Total Harmonic Distortion. Controlled ignition. Low frequency square wave operation. Lamp power and current control. Open circuit and no-lamp protection. Short circuit and lamp failure to warm-up protection. Lamp end-of-life shutdown.
                • IRS2573DSPBF
                active
                DEMOBOARD TLD1311EL LED Driver & Ballast Controller 1 in/3 out - N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel). To order please contact our sales office or distributor
                • TLD1311EL
                on request
                DEMOBOARD TLD1124EL LED Driver & Ballast Controller 1 in/1 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function (to order please contact our sales office or distributor)
                • TLD1124EL
                on request
                REF-XDPL8220-U50W LED Driver & Ballast Controller Efficient and flickerfree reference circuit design with high power factor and low THD, Universal input voltage for 30W output power.
                • CDM10V
                • CoolMOS CE
                • CoolMOS P7
                • XDPL8220
                active and preferred
                DEMOBOARD TLD1326EL LED Driver & Ballast Controller 1 in/3 out - Matrix configuration and PWMI and N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel). To order please contact our sales office or distributor
                • TLD1326EL
                on request
                APPBOARD TLD5098EL V5 LED Driver & Ballast Controller Boost to Ground Configuration with Short to Ground Protection with EMC filter (to order please contact our sales office or distributor)
                • TLD5098EL
                on request
                IRPLDIM4E Featuring IRS2530D DIM8™ HVIC ballast controller . Closed-loop dimming control. Programmable preheat time. Frequency sweep for filament preheat and lamp ignition. Open filaments and no-lamp protection. Failure to strike and deactivated-lamp protection. Low AC line protection. Lamp exchange auto restart.
                • IRS2530DPBF
                active
                APPBOARD TLD5098EL V6 LED Driver & Ballast Controller Boost to Battery Configuration with EMC filter (to order please contact our sales office or distributor)
                • TLD5098EL
                on request
                REF-XDPL8220-U30W LED Driver & Ballast Controller, MOSFET Efficient and flickerfree reference circuit designfor (XDPL8220) with high power factor and low THD.It is built for universal input voltage (90V-305V) and for 30W output power. It implements a dual stage PFC, Flyback topology.
                • CDM10V
                • CoolMOS CE
                • CoolMOS P7
                • XDPL8220
                active and preferred
                DEMOBOARD TLD1314EL LED Driver & Ballast Controller 1 in/3 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function ( to order please contact our sales office or distributor)
                • TLD1314EL
                on request
                EVALLEDICL5101E1 LED Driver & Ballast Controller, MOSFET PFC/LLC Constant Voltage Evaluation Board 110W LED Driver
                • BSP135
                • ICL5101
                • IPD60R450E6
                • IPP60R125C6
                active and preferred
                BCR450 BOARD LED Driver & Ballast Controller Drive high-power LEDs (1W, 3W) with the BCR 450 - Max. supply voltage: 27V - BCR 450 + 3 different transistors for currents up to 2A>- BAS 3007A-RPP Schottky Diode for Reverse Polarity Protection - Can be connected to a string of LEDs - PWM signal can be applied
                  on request
                  DEMOBOARD TLD5095EL VER2 LED Driver & Ballast Controller 1. Boost to Battery Voltage – B2B (default) 2. Constant Voltage Mode (external components arrangement must be modified). To order please contact our sales office or distributor
                  • TLD5095EL
                  on request
                  TLD5541-1QV DEMO V1 LED Driver & Ballast Controller TLD5541-1QV Systemdemobord (w/o uC board)To order please contact our sales office or distributor.
                  • TLD5541-1QV
                  on request
                  BOARD TLD5097 B2B LED Driver & Ballast Controller Boost to Battery configurationTo order please contact our sales office or distributor.
                  • TLD5097EL
                  on request
                  DEMOBOARD TLD1125EL 1 in/1 out - PWMI and Open load and Short Circuit diagnosis ( to order please contact our sales office or distributor)
                  • TLD1125EL
                  on request
                  TLD5541-1QV DEMOKIT LED Driver & Ballast Controller TLD5541-1QV Systemdemoboard incl. uC boardTo order please contact our sales office or distributor.
                  • TLD5541-1QV
                  on request
                  APPBOARD TLD5098EL VER3 LED Driver & Ballast Controller Boost to Battery Configuration ( to order please contact our sales office or distributor)
                  • TLD5098EL
                  on request
                  DEMOBOARD TLD1315EL LED Driver & Ballast Controller 1 in/3 out - PWMI and N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel). To order please contact our sales office or distributor
                  • TLD1315EL
                  on request
                  EVALLED-ICL8002G-B3 LED Driver & Ballast Controller Evaluation board for dimmable 20W LED PAR38 in isolated flyback topology
                    active and preferred
                    DEMOBOARD TLD2311EL LED Driver & Ballast Controller 3 in/3 out - Matrix configuration and Open Load and Short Circuit diagnosis To order please contact our sales office or distributor.
                    • TLD2311EL
                    on request
                    TLD5190QV DEMO V2 LED Driver & Ballast Controller H-Bridge Demoboard for Multichannel applications w/o the need for uCTo order please contact our sales office or distributor.
                    • TLD5190QV
                    on request
                    IRPLCFL5E
                    • IR2520D
                    active
                    REF-XDPL8105-CDM10V LED Driver & Ballast Controller 40W LED driver reference design with isolated 0 – 10V dimming interface using the XDP™ XDPL8105 digital flyback controller, the CDM10V dimming IC and 800V CoolMOS™ CE
                      active and preferred
                      APPBOARD TLD5098EL VER4 LED Driver & Ballast Controller SEPIC Configuration ( to order please contact our sales office or distributor)
                      • TLD5098EL
                      on request
                      EVALLED-ICL8002G-B1 LED Driver & Ballast Controller Evaluation board for dimmable 13W LED bulb in isolated flyback topology
                        active and preferred
                        TLD5190QV DEMO V1 LED Driver & Ballast Controller H-Bridge Demoboard (w/o SPI)To order please contact our sales office or distributor.
                        • TLD5190QV
                        on request
                        ILD4001 1.0A BOARD LED Driver & Ballast Controller
                          active and preferred
                          ILD4035 12V BOARD LED Driver & Ballast Controller Drive 1W LEDs with the buck LED driver ILD 4035- 24V and 12V supply voltage version available- 350mA preset LED current- Analog voltage and PWM pin for dimming- Can be connectec to a string of 1W LEDs
                            active and preferred
                            EVALLED-ICL8002G-B2 LED Driver & Ballast Controller Evaluation board for dimmable 12W LED bulb in non-isolated buck topology
                              active and preferred
                              IF-BOARD.DP-GEN2 LED Driver & Ballast Controller Galvanic isolated and CE certified .dp InterfaceGen2, which is used to set parameters and protection behavior for digital power products. It can be used to either test parameter temporarily or to burn them permanently. The .dp device will be connected via USB to a computer and is controlled using the .dp Vision Software. Application Addon packages are necessary for the dedicated products. They can be found in the download section for e.g. ICL8105, XDPL8105, XDPL8220 or ILD2111.
                                active and preferred
                                APPBOARD TLD5098EL VER2 LED Driver & Ballast Controller Boost to Ground Configuration with Short to Ground Protection ( to order please contact our sales office or distributor)
                                • TLD5098EL
                                on request
                                EVALLED-ILD6150 LED Driver & Ballast Controller Evaluation board for high-power LEDs at EVALLED-ILD6150DC voltage input using ILD6150
                                  active and preferred
                                  EVALLEDICL5101E2 LED Driver & Ballast Controller PFC/LLC Constant Current Evaluation Board 130W LED Driver
                                    active and preferred
                                    DEMOBOARD TLD1121EL LED Driver & Ballast Controller 1 in/1 out - Open Load and Short Circuit diagnosis ( to order please contact our sales office or distributor)
                                    • TLD1121EL
                                    on request
                                    IRPLDIM5E Featuring IRS2530D DIM8™ HVIC ballast controller . Drives 25-26W CFL Lamp. Input Voltage: 220Vac. High Frequency Operation. Lamp Filament Preheating. Lamp Fault Protection with Auto-Restart. Low AC Line/Brownout Protection. Microcontroller driven 4 level power pulse dimming.
                                    • IRS2530DPBF
                                    active
                                    REF-ICL8105-CDM10V LED Driver & Ballast Controller 40W LED driver reference design with isolated 0 – 10V dimming interface using the XDP™ ICL8105 digital flyback controller, the CDM10V dimming IC and 800V CoolMOS™ CE
                                      DEMOBOARD TLE4242G LED Driver & Ballast Controller Constant current source
                                      • TLE4242G
                                      on request
                                      EVALLEDILD2111E1 LED Driver & Ballast Controller 20W evaluation system for DCDC LED driver using the ILD2111 digital buck controller and 75V OPTIMOS™ transistor
                                      • ILD2111
                                      active and preferred
                                      EVAL_16W_66V_BCK_CE LED Driver & Ballast Controller, MOSFET 16W adapter demo board for Lighting applications
                                      • ICL8201
                                      • IPN60R3K4CE
                                      active
                                      KIT_XMCI45_LARIX_PINU_1 Security, Gate Driver, LED Driver & Ballast Controller, Linear Voltage Regulator (LDO), MOSFET, Power Controller (PWM, PFC), Sensor Quadrocopter demonstrator kit with 9-axis motion tracking, pressure sensor and authentication representation. Control via Bluetooth or radio transmitter.
                                      • BCR321U
                                      • BSC0925ND
                                      • DPS310
                                      • IFX1117MEV33
                                      • IFX91041V50
                                      • IR2301S
                                      • MPU9250
                                      • ORIGA™ 2L
                                      • XMC1302 Q040X0128
                                      • XMC4200 OBD
                                      • XMC4500
                                      coming soon

                                      Simulation Tool

                                      Titel Größe Datum Version
                                      819 B 13 Jun 2016 01_00
                                      839 B 28 Jul 2016 01_00
                                      819 B 22 Jun 2016 01_00
                                      807 B 05 Apr 2016 01_00
                                      819 B 01 Apr 2016 01_00
                                      811 B 01 Apr 2016 01_00
                                      817 B 13 Jun 2016 01_00
                                      777 B 16 Sep 2016 01_00
                                      811 B 01 Apr 2016 01_00
                                      803 B 26 Apr 2016 01_00
                                      819 B 05 Apr 2016 01_00
                                      823 B 01 Apr 2016 01_00
                                      821 B 28 Jul 2016 01_00
                                      767 B 16 Sep 2016 01_00
                                      805 B 05 Apr 2016 01_00
                                      817 B 22 Jun 2016 01_00
                                      811 B 01 Apr 2016 01_00
                                      811 B 01 Apr 2016 01_00

                                      Finden Sie eine Antwort auf Ihre Frage

                                      Infineon begrüßt Ihre Kommentare und Fragen.

                                      Wenn Sie Fragen zu unseren Produkten haben, füllen Sie bitte das folgende Formular aus. Ihre Anfrage wird an einen entsprechenden Spezialisten gesendet, der so bald wie möglich eine Antwort senden wird.

                                      Sie erhalten eine Bestätigungs-E-Mail um Ihre Adresse in unserem System zu validieren. Jede angehängte Datei in Ihrer Antwort, die uns helfen kann, Ihre Anfrage bestmöglich zu beantworten, ist willkommen.

                                      Für weitere Information über unsere Datenschutzbestimmungen folgen Sie bitte diesem Link zu den Datenschutzbestimmungen
                                      Die mit einem Stern (*) gekennzeichneten Felder sind Pflichtfelder.

                                      Where to buy

                                      Please use our location finder to get in contact with your nearest Infineon distributor or sales office

                                      Find a location

                                      Ask Infineon