CYBLE-202013-PROG

Überblick

EZ-BLE Module Programming Kit

The EZ-BLE Module Programming Kit (CYBLE-202013-PROG) enables you to easily program the following EZ-BLE PSoC™ modules prior to manufacturing: CYBLE-202013-11.

The CYBLE-202013-PROG kit is designed to be used with one of the following items: MiniProg3 (CY8CKIT-002), BLE Pioneer Kit (CY8CKIT-042-BLE) or a third party programming tool like MPQ-PSoC™ (4 port In-system Programmer for Cypress from RPM). 

The life time of the socket used in this programming kit is 50,000 insertions.

 

  1. Connect the kit with one of the following three programming devices:
    1. BLE Pioneer kit (CY8CKIT-042-BLE)
    2. MiniProg3 (CY8CKIT-002)
    3. Third-party programming tool, such as MPQ-PSoC™ 
  2. Put the BLE module in the socket (ensure that the BLE module is in the correct position of the socket, as shown below)
  3. Connect the programming devices with a USB cable to a computer that has been installed with PSoC™ Programmer, PSoC™ Creator or a third-party programming software, such as MPManager from RPM.
  4. Run the programming software to program the targeted BLE modules with your selected fi­rmware.

1 x EZ-BLE Module Programming Kit (CYBLE-202013-PROG)

Support