Mikro Speicherprogrammierbare Steuerung (Mikro-SPS)
Die ultimative Steuerung für Gebäudeautomation und Heimautomation
Mikro-SPS sorgen in einer Vielzahl gängiger Anwendungen für elementare Steuerfunktionen und unterliegen dabei dem steigenden Druck, benutzerfreundlich und kostengünstig zu sein. Im Sinne dieser Anforderungen bietet Infineon mit der Produktreihe XMC1000 hochwertige Mikrokontroller zu einem attraktiven Preis.
Da man bei Infineon überzeugt ist, dass auch kostengünstige Produkte verbessert werden sollten, sind eine Reihe von XMC1000-Mikrokontrollern mit einer optionalen integrierten Sicherheits-IP ausgestattet. Ein herausragender Mehrwert für Ihre Mikro-SPS-Anwendungen, den Sie nirgendwo sonst finden werden.
Mikro-SPS Systemdiagramm
The performance and quality your building control designs need
In tune with these demands, Infineon offers high-quality microcontrollers in the XMC1000 family – at an attractive price. Our XMC1000 family houses an ARM® Cortex™-M0 core and is ideally suited for a micro PLC’s communication and human-machine interface tasks. It offers 200kb of flash, 2 CAN nodes, 4 serial channels, 3 x 64 LED matrix control, 9-channel LED brightness and color control.
Because at Infineon we believe that even cost-friendly products deserve enhancements, a selection of our XMC1000 microcontrollers is equipped with an optional integrated security IP. This exceptional added value for your micro PLC application is something you’ll find nowhere else on the market. Explore our solutions for micro PLCs and boost your application with components from Infineon.
DEMOBOARD IFX81481
This application board enables you to test the IFX81481ELV high efficiency synchronous step-down DC/DC controller.
It is equipped with IFX81481ELV and is pre-adjusted to an output voltage of 5.6V. The application board enables the user to test the performance with two different configurations of the current limit. The board is fully equipped with external components, including two high performance MOSFET switches.
DEMOBOARD IFX90121
This application board enables you to test the performance of the IFX90121 basic buck converter.
It is equipped with a IFX90121EL V50 with a fixed 5V output voltage. The application board for the IFX90121 enables the user to test the performance of the low Iq, 5V buck converter. The board is fully equipped with external components.
DEMOBOARD IFX91041
This application board enables you to test the performance of the IFX91041 basic buck converter. It is equipped with a IFX91041EJV for variable output voltages (preadjusted to 4.8V). The board offers several options to modify the schematic and also the possibility to drive LEDs.
DEMOBOARD IFX80471V
Multi-purpose buck controller for external PMOS switch, 5V or adjustable output voltage, maximum of 2.3A output current, low quiescent current.
Basic control unit to generate Highspeed CAN datastreams. Plug & play, ready to use system to build up complete CAN networks. Additional software examples are provided to allow timing measurements and to verify signal integrity.
The HITFET™ Demoboards are a small PCB where a engineering sample is already mounted with a 6 cm² copper cooling area. All device pins can be directly accessed for customer measurements
DEMOBOARD BTS3046SDL
DEMOBOARD BTS3028SDL
DEMOBOARD BTS3104SDR
DEMOBOARD BTS3046SDR
DEMOBOARD BTS3028SDR
DEMOBOARD BTS3104SDL
IND PROFET_EVAL BOARD
This Industrial PROFET™ universal evaluation kit enables you to test the performance of the new Industrial product family.
XMC4800 Relax EtherCAT Kit
Evaluation kit for XMC4800 microcontroller with integrated EtherCAT® Slave Controller
ISOFACE™ - Isolated Industrial Interface
Compilation of ISOFACETM evaluation boards – dedicated solutions for programmable logic controllers (PLCs)
XMC1000 Motor Control Application Kit
Implements TLV5012B angle sensor enabling accurate rotor position detection. MCU board with XMC1300 and detachable SEGGER J-Link debug interface - Motor Board: 12 – 24V, up to 3A, On board 3-phase motor (24V, 15W) with hall sensors, Optional encoder interface.
Sensors 2GO
Smallest, fully featured evaluation kits - The 3D Magnetic Sensor 2GO is a budget-priced evaluation board equipped with a magnetic sensor for three dimensional measurement combined with an ARM® Cortex™-M0 CPU. The 3D Magnetic Sensor 2GO has a complete set of on-board devices, including an on-board debugger. Build your own application and gadget with the 3D Magnetic Sensor 2GO.
Verwandte Links
Discrete IGBTs for welding UPS and SMPS applications: TRENCHSTOP™5
Infineon system solution for industrial automation industry
Infineon's solutions for UPS in industrial automation
Full system solution for PLC with focus on industrial PROFET™ devices
XMC1400 and XMC4800-High performance realtime ARM® Cortex® M0 and M4 EtherCAT® MCU
