TLE9879QXW40 - Infineon Technologies

综述

MOTIX™ TLE9879QXW40 is used for high-temp BLDC applications such as engine cooling

The MOTIX™ TLE9879QXW40 is part of the MOTIX™ TLE987x product family. The MOTIX™ TLE9879QXW40 is a single chip 3-Phase motor driver that integrates the industry standard Arm® Cortex®-M3 core, enabling the implementation of advanced motor control algorithms such as field-oriented control. It includes six fully integrated NFET drivers optimized to drive a 3-Phase motor via six external power NFETs, a charge pump enabling low voltage operation and programmable current along with current slope control for optimized EMC behavior. Its peripheral set includes a current sensor, a successive approximation ADC synchronized with the capture and compare unit for PWM control and 16-bit timers. A LIN transceiver is also integrated to enable communication to the device along with a number of general purpose I/Os. It includes an on-chip linear voltage regulator to supply external loads.

It is a highly integrated AEC-Q100 Grade 0 automotive qualified device enabling cost and space efficient solutions for mechatronic BLDC motor drive applications that are located under-the-hood such as engine cooling fans.

指标参数

文件

订单

评估板

软件和工具

Infineon Embedded Power ICs are supported by a complete development tool chain provided by Infineon and third party vendors. The tool chain includes compilers, debuggers, evaluation boards, LIN low level drivers and configuration tools as well as variety of example software code.

For more information about the tool chain installation steps, watch our video "Toolchain Installation for Embedded Power ICs / TLE98xx".

Steps		Company	Description
STEP 1	Download and Install Keil^® µVision5		Arm^® Keil^®µVision is an integrated development environment which consists of code editor, compiler and debugger. To learn how to use Arm^® Keil^®µVision 5, check out our video "Get your motor spinning".
STEP 2	Download Config Wizard		Infineon provides the Config Wizard free of charge which is designed for configuration of chip modules. Config Wizard supports easy configuring of Embedded Power peripherals. Config Wizard V2 can be installed via the Infineon Toolbox. If you don´t have the Infineon Toolbox yet, please go to Infineon Toolbox and enjoy the release management for updates.*
STEP 3	Download and Install Segger J-Link Driver		SEGGER J-Link is a widely used driver for "on-board" or "stand-alone" debugger.
STEP 4	Download the SDK via µVision 5 Pack Installer (see step 1)		The Embedded Power Software Development Kit (SDK) is a low level driver library which can be downloaded within Keil^® µVision via the "Pack Installer"

*If you still need the Config Wizard V1, please follow the link.

设计的附加工具

工具	描述
功率损耗	功率损耗工具是一个接口，可帮助您估算芯片的功率损耗和温度。它适用于整个嵌入式电源IC系列。功率损耗工具可以通过英飞凌工具箱安装。如果您还没有英飞凌工具箱，请访问英飞凌工具箱并使用更新的发布管理。
Boot Strap Loader通过 uIO Stick进行支持	嵌入式电源IC提供内置的引导带加载程序（BSL），用于通过内置LIN收发器或UART对片上系统器件进行编程。这款 uIO Stick 充当TLE98xx设备和PC之间的接口。它处理BSL协议以及物理层。PC应用程序（ uIO BSL 工具）提供对嵌入式电源设备的所有BSL功能的访问。
MicroInspector (Pro)	The Micro Inspector (Pro) is a graphical visualization tool for embedded software based on Arm^® Cortex^®-M cores. It provides a simple & clean GUI where only relevant buttons & tabs are displayed. No programming knowledge is required. It provides a possibility to read & write the memory of embedded target processor during run time and offers a set of tool features (indicators & virtual controls) on graphical dashboards, which can be mapped to the memory locations. Micro Inspector with a read-only view is free of charge and can be downloaded via the Infineon Toolbox. Micro Inspector Pro offers the option to save your own dashboards. This version can be requested via our TAC and comes with a yearly fee of 399€/license.

工具

描述

功率损耗

功率损耗工具是一个接口，可帮助您估算芯片的功率损耗和温度。它适用于整个嵌入式电源IC系列。
功率损耗工具可以通过英飞凌工具箱安装。如果您还没有英飞凌工具箱，请访问英飞凌工具箱并使用更新的发布管理。

Boot Strap Loader通过 uIO Stick进行支持

嵌入式电源IC提供内置的引导带加载程序（BSL），用于通过内置LIN收发器或UART对片上系统器件进行编程。这款 uIO Stick 充当TLE98xx设备和PC之间的接口。它处理BSL协议以及物理层。PC应用程序（ uIO BSL 工具）提供对嵌入式电源设备的所有BSL功能的访问。

MicroInspector (Pro)

The Micro Inspector (Pro) is a graphical visualization tool for embedded software based on Arm^® Cortex^®-M cores. It provides a simple & clean GUI where only relevant buttons & tabs are displayed. No programming knowledge is required. It provides a possibility to read & write the memory of embedded target processor during run time and offers a set of tool features (indicators & virtual controls) on graphical dashboards, which can be mapped to the memory locations.
Micro Inspector with a read-only view is free of charge and can be downloaded via the Infineon Toolbox.
Micro Inspector Pro offers the option to save your own dashboards. This version can be requested via our TAC and comes with a yearly fee of 399€/license.

英飞凌推荐 LIN 低电平驱动器 (LLD) 合作伙伴 IHR 和 Vector——汽车电子设备领域知名组织

IHR 和 Vector 是经过验证的合作伙伴，其驱动器和驱动器配置工具兼容英飞凌嵌入式电源 IC，支持 LIN 规范 1.3、2.0 和 2.1。提供的解决方案让设计师有更多选择，具有可靠的测试规范、直观的操作和诊断服务。

仿真工具

Use our simulation models to understand the behavior of the Embedded Power devices.

The MOTIX™ TLE986x_7x_BDRV Bridge Driver contains programmable current-driven gate drivers. The MOTIX™ TLE986x_7x_BDRV Bridge Driver PSpice Model provides one gate driver instance as a PSpice subcircuit and covers all first-order effects which are relevant for investigations on timings and power dissipation of the external MOSFETs. The MOTIX™ TLE986x/7x CSA contains the Current Sense Amplifier block.
The MOTIX™ TLE986x/7x CSA PSpice / Saber / SIMetrix models provide the CSA instance as a PSPICE / Saber / SIMetrix subcircuit, allowing to perform transient and DC sweep analysis. The models include the main parameters in order to properly configure the CSA, as reported in the MOTIX™ TLE986x/7x datasheets and user manuals.
The IBIS (Input/output Buffer Information Specification) model provides information about the digital inputs/output buffers of the respective projects. The model can be used to perform various board level, signal integrity (SI) simulations and timing analyses.

视频

Share

合作伙伴

培训

Automotive Motor Control – Understandable

Welcome to our new training series “Automotive Motor Control - Understandable”. This series is aimed at all those who have something to do with electric motors and motor control in Automotive or want to get a first overview. The topics covered within the training have furthermore been tailored to auxiliary units such as pumps and fans.