PRO-SIL™安全产品

32-bit Arm® Cortex® Microcontroller (MCU) Families by Cypress

赛普拉斯半导体已正式并入英飞凌科技：双方的产品和技术高度互补。合并后，英飞凌将拥有业内更加全面，极具竞争力的产品组合，连接现实与数字世界。整合后的产品包括：用于互联时代的硬件、软件和安全解决方案。
增强现实与数字世界的连接

Safety documentation 

Click & check below PRO-SIL™  portfolio of Infineon: 

PRO-SIL™ highlights : 

•  Broad hardware portfolio, including sensors and microcontrollers, along with analog and power management ICs that provide SIL-supporting features
• An independent functional safety management organization supports the ISO 26262 safety lifecycle
• Safety documentation, such as a safety manual and safety analysis summary report, can be made available for dedicated PRO-SIL™ products (NDA may be required)
•  Infineon offers expert system integrator support for achieving  the required ASIL on system level 
• Infineon’s PRO-SIL™ logo will guide you to our products (hardware, software, safety documentation) with SIL-supporting features. Infineon’s activities result in simplified integration in safety-related application

Functional safety – ISO 26262:2018- Infineon is benchmark in Functional Safety

ISO 26262 defines the development of electric and electronic automotive systems with regard to their functional safety. The aim of this standard is to reduce possible hazards caused by the failure and malfunction of such systems. The safety requirements for the development process depend on the ASIL rating of the target application and can range from ASIL A to ASIL D.   Applications such as steering or braking  systems are rated with the highest ASIL D level. A failure in such a system can lead to an out-of-control vehicle, possibly resulting in fatal injuries.  All newly developed parts, which are addressing a certain safety goal will be based on an ISO 26262-compliant development flow, thereby allowing direct use in all safety-relevant applications. Devices which are developed prior to the ISO 26262 as a QM part can nevertheless be used in ISO-compliant systems as outlined in part 8 clause 13 of the standard. In such cases, it is mandatory “to provide evidence of the suitability of hardware components and parts” for use in ISO-compliant systems and also to provide failure modes, their distribution and diagnostic capability. 

To support our customers as they strive to achieve the highest ASIL on system level, Infineon provides both the necessary support for qualification of existing pre ISO 26262 products, and fully ISO 26262-compliant products of the future 

请访问微控制器媒体中心观看更多视频