Automotive PSoC™ 4100

• 24-MHz Arm® Cortex®-M0 CPU with single-cycle multiply
• Up to 32 KB of flash with Read Accelerator
• Up to 4 KB of SRAM

• One opamp with reconfigurable high-drive external and high-bandwidth internal drive, Comparator mode, and ADC input buffering capability
• 12-bit, 806 Ksps SAR ADC with differential and single-ended modes and Channel Sequencer with signal averaging
• Two current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
• Two low-power comparators that operate in Deep Sleep

• 20 nA Stop Mode with GPIO pin wakeup
• Hibernate and Deep Sleep modes allow wakeup-time versus power trade-offs

• Cypress Capacitive Sigma-Delta (CSD) provides best-in-class signal-to-noise ratio (SNR) and water tolerance
• Cypress-supplied software component makes capacitive sensing design easy
• Automatic hardware tuning (SmartSense™)

• LCD drive supported on all pins (common or segment)
• Operates in Deep Sleep mode with 4 bits per pin memory

• Two independent run-time reconfigurable serial communication blocks (SCBs) with reconfigurable I2C, SPI, UART, or LIN Slave 1.3, 2.1/2.2 functionality

• Four 16-bit Timer/Counter Pulse-Width Modulator (TCPWM) blocks
• Center-aligned, Edge, and Pseudo-random modes
• Comparator-based triggering of Kill signals for motor drive and other high reliability digital logic applications

• 28-pin SSOP packages
• Any GPIO pin can be CapSense, LCD, analog, or digital
• Drive modes, strengths, and slew rates are programmable

• A Grade: –40 °C to +85 °C
• S-Grade: –40 °C to +105 °C

• Integrated Development Environment (IDE) provides schematic design entry and build (with analog and digital automatic routing)
• Applications Programming Interface (API) component for all fixed-function and programmable peripherals

• After schematic entry, development can be done with Arm-based industry-standard development tools

• Enables a touch user interface with up to 24 I/Os
• SmartSense Auto-tuning speeds time-to-market and eliminates the need for manual system tuning.
• Prevents false touches caused by liquids.
• Implements advanced proximity sensing: wake-on-approach, liquid level detection, and IR sensor replacement.

Automotive PSoC™ 4 reduces system cost with Programmable Digital Blocks, Programmable Analog Blocks, CapSense and LIN Slave to:

• Create custom AFEs for sensors and add sophisticated user interfaces
• Communicate to car network with integrated LIN
• Slave controllers
• PSoC™ Creator enables easy integration of multiple ICs and system interfaces into one PSoC

• Zero false touches reported by the touch sensors in harsh automotive environment.
• Reduces Radiated Emissions (RE) by easily modifying CapSense Component parameters in PSoC™ CreatorTM IDE.
• Complies with standard emission and immunity specifications like CISPR 25, ISO 11452, IEC 61967 and IEC 62132.

• A Grade: –40 °C to +85 °C
• S-Grade: –40 °C to +105 °C

PSoC™ 4100 family adds intelligent analog integration through programmable analog blocks. Programmable analog blocks are hardware modules that include Analog-to-Digital Converters (ADCs), Digital-to-Analog Converters (DACs), low-power comparators, and Operational Amplifiers (opamps). Programmable analog block enable you to customize your analog front end to interface to virtually any analog sensor.

• Liquid-tolerant capacitive touch interface for buttons and sliders
• Proximity detection
• Humidity and temperature-sensing interface via integrated analog front end
• Induction coil IGBT driver control
• Other control and interface functions such as fan control, segment LCD, and Piezo speaker

• HVAC
• Infotainment & Navigation
• Integrated Systems

• Interior HMI
• Natural HMI surfaces

• Door lock / unlock
• Foot-kick, emblem touch

• Buttons/Sliders/TP
• Force-sensing, haptics

• AdBlue
• Water & Fuel, Quality
• Smart Sensor

• POD
• HOD