DC-DC LED Driver IC and Linear Control Solutions

 
  • Products
  • Highlights
  • Documents
  • Boards
  • Simulation
  • Videos
  • Forums
  • Support
  • Software & Tools

DC-DC LED Driver IC and Linear Control Solutions

Efficiencies up to 98%, dimming level down to 1%, supported by user-friendly design tools

Luminaire and specialty lighting makers often have to adapt their lighting control solution to specific project needs. Each lighting installation is unique and needs to consider design and smart lighting control aspects. And, meeting the comprehensive requirements of large projects can be a difficult challenge to master. At Infineon we have a full range of AC/DC, DC/DC and linear LED control solutions addressing all kinds of general lighting applications from a simple strip light to high power LED driver.

 

Highly efficient switch mode LED drivers increase system efficiency up to 98%, offer analog or PWM dimming interfaces. And they also come with smart thermal protection, to ensure for safety reasons you’re never left in the dark. Leveraging the Infineon  Light Desk design tool and technical resources, we can help you quickly build innovative LED lighting solutions exactly meeting your customers’ requirements. Get your samples below and test for yourself.


DC-DC LED Driver IC and Linear Control Solutions subcategories


ifx-banner-energy-eficiency-175x150 IFX_Website-Button_dp-01 IFX_UrbanFarming_Banner

Banner_SelectionGuide

 

 

NEW! Power Management Selection Guide 2016

General Lighting Brochure 2014


Product Product Status Order Online Packages Green Budgetary Price €€/1k Type Dimming VS Iout
Matching Results: 25
descending ascending         descending ascending descending ascending descending ascending descending ascending descending ascending descending ascending descending ascending descending ascending
1. High Performance Digital Buck Controller
ILD2111 

active and preferred

 

 

PG-DSO-8

- Buck
Digital
-
2.5 V
600.0 V
10.0 mA
3000.0 mA
2. LED Driver ICs for high power LEDs
ILD6150 

active and preferred

Buy online

PG-DSO-8

0.84
Buck
Analog or digital
-
4.5 V
60.0 V
1500.0 mA
1500.0 mA
ILD6070 

active and preferred

Buy online

PG-DSO-8

0.71
Buck
Analog or digital
-
4.5 V
60.0 V
700.0 mA
700.0 mA
ILD4035 E6327 

active and preferred

Buy online

PG-SC74-6

0.33
Buck
Analog or digital
-
4.5 V
40.0 V
350.0 mA
400.0 mA
ILD4120 E6327 

discontinued

 

 

PG-DSO-8

0.59
Buck
- -
4.5 V
40.0 V
1200.0 mA
1200.0 mA
ILD4180 

discontinued

 

 

PG-DSO-8

- Buck
- -
4.75 V
45.0 V
1800.0 mA
1800.0 mA
TLE4309G 

active and preferred

Buy online

PG-TO263-7

0.66
Linear
- -
4.5 V
24.0 V
500.0 mA
500.0 mA
ILD4071 

active and preferred

 

 

PG-DSO-8

- Buck
- -
6.0 V
45.0 V
500.0 mA
700.0 mA
3. LED Driver ICs for medium power LEDs
BCR320U 

active and preferred

Buy online

PG-SC74-6

0.19
Linear
no
-
1.4 V
25.0 V
250.0 mA
300.0 mA
BCR321U 

active and preferred

Buy online

PG-SC74-6

0.19
Linear
Digital
-
1.4 V
25.0 V
250.0 mA
300.0 mA
BCR420U 

active and preferred

Buy online

PG-SC74-6

0.19
Linear
no
-
1.4 V
40.0 V
150.0 mA
200.0 mA
BCR421U 

active and preferred

Buy online

PG-SC74-6

0.19
Linear
Digital
-
1.4 V
40.0 V
150.0 mA
200.0 mA
4. LED Driver ICs for low power LEDs
BCR401R 

active and preferred

Buy online

PG-SOT143-4

0.09
Linear
Digital
-
1.2 V
18.0 V
10.0 mA
60.0 mA
BCR401U 

active and preferred

Buy online

PG-SC74-6

0.12
Linear
Digital
-
1.4 V
40.0 V
10.0 mA
65.0 mA
BCR401W 

active and preferred

Buy online

PG-SOT343-4

0.08
Linear
Digital
-
1.2 V
18.0 V
10.0 mA
60.0 mA
BCR402R 

active and preferred

Buy online

PG-SOT143-4

0.09
Linear
Digital
-
1.2 V
18.0 V
20.0 mA
60.0 mA
BCR402U 

active and preferred

Buy online

PG-SC74-6

0.12
Linear
Digital
-
1.4 V
40.0 V
20.0 mA
65.0 mA
BCR402W 

active and preferred

Buy online

PG-SOT343-4

0.08
Linear
Digital
-
1.4 V
18.0 V
20.0 mA
60.0 mA
BCR405U 

active and preferred

Buy online

PG-SC74-6

0.12
Linear
Digital
-
1.4 V
40.0 V
50.0 mA
65.0 mA
5. LED Controller IC
BCR205W 

active and preferred

Buy online

PG-SOT343-4

0.14
Linear
no
-
0.2 V
18.0 V
0.5 mA
50.0 mA
BCR450 

active and preferred

Buy online

PG-SC74-6

0.29
Linear
Digital
-
8.0 V
27.0 V
70.0 mA
3000.0 mA
ILD4001 E6327 

active and preferred

Buy online

PG-SC74-6

0.33
Buck
Analog or digital
-
4.5 V
42.0 V
10.0 mA
3000.0 mA
ILD1151 

active and preferred

 

 

PG-SSOP-14

- Multi-Topology
- -
4.5 V
45.0 V
70.0 mA
3000.0 mA
ILD1150 

active and preferred

 

 

PG-SSOP-14

- Multi-Topology
- -
4.75 V
45.0 V
70.0 mA
3000.0 mA
6. 0-10V Dimming Interface IC
CDM10V 

active and preferred

 

 

PG-SOT23-6

- 0-10V Dimming Interface IC
Analog or digital
11.0 V
-
-
5.0 mA
5.45 mA

DC-DC LED Driver IC and Linear Control Solutions

Application Notes

Title Size Date Version
1.5 MB 22 Jul 2014 02_01
238 KB 09 Dec 2011 01_00
284 KB 27 Jul 2007 01_00
1.6 MB 24 Mar 2015 02_02
1.4 MB 29 Jun 2011 01_01
1.1 MB 23 Jul 2013 01_01
1 MB 08 Mar 2012 01_00
1 MB 21 Mar 2012 01_01
2.4 MB 08 Aug 2012 01_01
2.5 MB 08 Aug 2012 01_01
1.4 MB 26 Jun 2012 01_00
1.1 MB 26 Jun 2012 01_00
1.8 MB 03 Aug 2012 01_01
993 KB 14 Dec 2010 01_00
1.4 MB 21 Jun 2010
3.2 MB 16 Feb 2010 01_00
1.6 MB 20 Jul 2011 01_00
1.6 MB 23 Jun 2011 01_01
1.4 MB 13 Sep 2011 01_00
1.8 MB 08 Dec 2009 01_00
1.2 MB 20 Dec 2010
1.2 MB 20 Dec 2010
1.9 MB 07 Jan 2010
2 MB 20 May 2011 01_00
543 KB 08 Dec 2009
3.6 MB 06 May 2010 01_00
1.7 MB 14 Apr 2009

Product Brief

Title Size Date Version
386 KB 26 Apr 2016 01_00

Whitepaper

Title Size Date Version
812 KB 10 Oct 2013 02_00

Application Brochure

Title Size Date Version
1.7 MB 23 Sep 2014 01_00
3.3 MB 01 Mar 2016 01_00
3.1 MB 23 Oct 2014 01_00

Product Selection Guide

Title Size Date Version
4.7 MB 22 Feb 2016 00_00

DC-DC LED Driver IC and Linear Control Solutions

Evaluation Boards

Board Family Description Status
IF-BOARD.DP-GEN2 Interface Boards Galvanic isolated and CE certified .dp InterfaceGen2, which is used to set parameters and protection behavior for digital power products. I can be used to either test parameter temporarily or to burn them permanently. The .dp device will be connected via USB to a computer and is controlled using the .dp Vision Software. Application Addon packages are necessary for the dedicated products. They can be found in the download section for e.g. ICL8105 or ILD2111.
    active and preferred
    EVALLEDILD2111E1 LED Driver & Ballast Controller 20W evaluation system for DCDC LED driver using the ILD2111 digital buck controller and 75V OPTIMOS™ transistor
    • ILD2111
    active and preferred
    CDM10V_PRG_BOARD LED Driver & Ballast Controller Configuration Board for CDM10V
    • CDM10V_PRG_BOARD
    coming soon
    CDM10V_DEMO_BOARD LED Driver & Ballast Controller Demonstration Board for CDM10V and ICL8105
    • CDM10V_DEMO_BOARD
    coming soon
    BCR450 BOARD LED Driver & Ballast Controller Drive high-power LEDs (1W, 3W) with the BCR 450
    - Max. supply voltage: 27V
    - BCR 450 + 3 different transistors for currents up to 2A
    - BAS 3007A-RPP Schottky Diode for Reverse Polarity Protection 
    - Can be connected to a string of LEDs
    - PWM signal can be applied
    • BCR 450
    on request
    KIT_XMCI45_LARIX_PINU_1 Quadrocopter demonstrator kit with 9-axis motion tracking, pressure sensor and authentication representation. Control via Bluetooth or radio transmitter.
      coming soon
      BCR320U HW LED BOARD LED Driver & Ballast Controller The BCR 320U is the only dedicated 0.5W LED driver on the market.
      BCR 320U demoboard features:
      - 24V supply voltage
      - Constant LED current of 150mA
      - BAS 3007A-RPP Schottky diode for reverse polarity protection
      - 6 x 0.5W LEDs, type: OSRAM Advanced Power Topled +
      • BCR 320U
      active and preferred
      MR16 3W BOARD LED Driver & Ballast Controller Drive 3 x 1W LED Halogen replacement (MR16) lamps with this ready-to-use reference design
      - equipped with ILD 4035 for 350mA LED current
      - 12V DC or AC supply voltage
      - 4 BAS 3010A Schottky diodes for reverse polarity protection
      - Including typical MR16 socket pins for instant use in existing designs.
      • ILD 4035
      on request
      ILD4035 12V BOARD LED Driver & Ballast Controller Drive 1W LEDs with the buck LED driver ILD 4035
      - 24V and 12V supply voltage version available
      - 350mA preset LED current
      - Analog voltage and PWM pin for dimming
      - Can be connectec to a string of 1W LEDs
      • ILD 4035
      active and preferred
      ILD4035 24V BOARD LED Driver & Ballast Controller Drive 1W LEDs with the buck LED driver ILD 4035
      - 24V and 12V supply voltage version available
      - 350mA preset LED current
      - Analog voltage and PWM pin for dimming
      - Can be connectec to a string of 1W LEDs
      • ILD 4035
      active and preferred
      BCR402W 24V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions
      - 24V supply voltage, 20mA preset LED current
      - Footprint for external resistor for adjusting LED current
      - Footprint for Schottky diodes (can be replaced by jumpers)
      - 6 x 0.2W LEDs in series, type: OSRAM TopLED LWT6SG
      • BCR 402W
      on request
      BCR402W 12V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions
      - 12V supply voltage, 20mA preset LED current 
      - Footprint for external resistor for adjusting LED current
      - Footprint for Schottky diodes (can be replaced by jumpers)
      - 3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG
      • BCR 402W
      on request
      MR16 10W BOARD LED Driver & Ballast Controller Control board for 10W MR16 low voltage halogen replacement lamps
      • ILD4001 + BSR302N
      active and preferred
      MR16 7W BOARD LED Driver & Ballast Controller Control board for 7W MR16 low voltage halogen replacement lamps
      • ILD4001 + BSR302N
      active and preferred
      ILD4120 BOARD LED Driver & Ballast Controller Drive 3W LEDs with the buck LED driver ILD 4120
      - 24V and 12V supply voltage version available
      - 700mA preset LED current
      - Analog voltage and PWM pin for dimming
      - Can be connected to a string of 3W LEDs
      • ILD 4120
      on request
      EVALLED-ILD6070 LED Driver & Ballast Controller ILD6070 60V/0.7A Highly Efficient Step Down LED Driver with Adjustable Thermal Protection
      • ILD6070
      active and preferred
      EVALLED-ILD6150 LED Driver & Ballast Controller ILD6150 60V/1.5A Highly Efficient Step Down LED Driver with Adjustable Thermal Protection
      • ILD6150
      active and preferred

      PCB Design Data

      Title Size Date Version
      51 KB 23 Oct 2013 02_00
      36 KB 23 Oct 2013 02_00
      9 KB 23 Oct 2013 02_00
      49 KB 23 Oct 2013 02_00

      DC-DC LED Driver IC and Linear Control Solutions

      Infineon welcomes your comments and questions.

      If you have any questions concerning our products, please fill out the following form. Your inquiry will be sent to the appropriate specialist who will be in touch with you as soon as possible.

      You will receive a confirmation E-mail to validate your address in our system. Any attached file to the reply which will help to support your inquiry is highly appreciated.

      I agree that my personal data mentioned above (including my e-mail address and phone number) can be gathered, processed and used for sales promotion and market research by Infineon Technologies AG and its licensed distribution partners.

      For more information about our privacy policy please click on Privacy Policy

      Where to buy

      Please use our location finder to get in contact with your nearest Infineon distributor or sales office

      Find a location

      Ask Infineon