Lighting ICs & Audio Driver ICs

 
  • Products
  • Highlights
  • Documents
  • Boards
  • Simulation
  • Videos
  • Forums
  • Support
  • Software & Tools

Lighting ICs & Audio Driver ICs

Smart Lighting and Power Conversion

 Infineon delivers innovative, high-performance solutions with best-in-class technologies that can be used in a broad range of lighting applications.

 



ifx-banner-energy-eficiency-175x150 IFX_Website-Button_dp-01 IFX_UrbanFarming_Banner

 

New Lighting brochure 2016

Mobile App

appstore

 

googleplay


Lighting ICs & Audio Driver ICs


IFX_Website-Button_dp-01


Lighting ICs & Audio Driver ICs

Additional Product Information

Title Size Date Version
75 KB 22 Mar 2016 01_00
74 KB 22 Mar 2016 01_00

Application Notes

Title Size Date Version
3.4 MB 18 May 2016 01_00

Product Selection Guide

Title Size Date Version
4.7 MB 22 Feb 2016 00_00

Product Brief

Title Size Date Version
435 KB 20 Oct 2011
386 KB 26 Apr 2016 01_00
568 KB 20 Oct 2011
168 KB 01 Mar 2016 01_00

Application Brochure

Title Size Date Version
6.9 MB 23 Oct 2014 01_00
3.3 MB 01 Mar 2016 01_00
1.7 MB 23 Sep 2014 01_00

Lighting ICs & Audio Driver ICs

Evaluation Boards

Board Family Description Status
EVALLEDICL5101E1 LED Driver & Ballast Controller PFC/LLC evaluation board 110W LED driver
    active and preferred
    IF-BOARD.DP-GEN2 Interface Boards Galvanic isolated and CE certified .dp InterfaceGen2, which is used to set parameters and protection behavior for digital power products. I can be used to either test parameter temporarily or to burn them permanently. The .dp device will be connected via USB to a computer and is controlled using the .dp Vision Software. Application Addon packages are necessary for the dedicated products. They can be found in the download section for e.g. ICL8105 or ILD2111.
      active and preferred
      EVALLEDICL8105E1 LED Driver & Ballast Controller 20 - 80W universal evaluation system for LED driver with contant current output based on the ICL8105 digital single-stage flyback controller and 800V CoolMOS™
      • ICL8105
      active and preferred
      EVALLEDICL8105F2 LED Driver & Ballast Controller 40W LED driver demoboard with isolated 0 - 10 V dimming interface using the ICL8105 digital flyback controller and 800V CoolMOS™
      • ICL8105
      active and preferred
      EVALLEDILD2111E1 LED Driver & Ballast Controller 20W evaluation system for DCDC LED driver using the ILD2111 digital buck controller and 75V OPTIMOS™ transistor
      • ILD2111
      active and preferred
      IRPLCFL5E
      • IR2520D
      active
      IRPLMB1E
      • IR2520D
      active
      IRAUDAMP12 130 W x 2 channels, (THD=10%, 1kHz, 4 Ohms). 0.02% THD+N distortion @ 50W, 4 Ohms. Residual noise 250 µV, IHF-A weighted, AES-17 filter. 96% Efficiency @ 130W, 4 Ohms, Class-D Stage. OCP, OVP, UVP,DC protection and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IR4301 PowIRaudio™ integrated Class D IC.
      • IR4301M
      active and preferred
      IRAUDAMP19 100 W x 2 channels, (THD=10%, 1kHz, 4 Ohms). 0.02% THD+N distortion @ 10W, 4 Ohms. Residual noise 230 µV, IHF-A weighted, AES-17 filter. 96% Efficiency @ 75W, 4 Ohms, Class-D Stage. OCP, OVP, UVP and OTP. Self-oscillating half-bridge topology. Featuring IR4301 PowIRaudio™ integrated Class D IC.
      • IR4301M
      active and preferred
      IRAUDAMP16 70 W x 2 channels, (THD=10%, 1kHz, 4 Ohms). 0.015% THD+N distortion @ 30W, 4 Ohms. Residual noise 250 µV, IHF-A weighted, AES-17 filter. 96% Efficiency @ 70W, 4 Ohms, Class-D Stage. OCP, OVP, UVP,DC protection and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IR4302 PowIRaudio™ integrated Class D IC.
      • IR4302M
      active and preferred
      IRAUDAMP17 100 W x 2 channels, (THD=10%, 1kHz, 4 Ohms). 0.008% THD+N distortion @ 30W, 4 Ohms. Residual noise 220 µV, IHF-A weighted, AES-17 filter. 96% Efficiency @ 100W, 4 Ohms, Class-D Stage. OCP, OVP, UVP and OTP. Self-oscillating half-bridge topology. Featuring IR4302 PowIRaudio™ integrated Class D IC.
      • IR4302M
      active and preferred
      IRAUDAMP15 35 W x 2 channels, (THD=10%, 1kHz, 4 Ohms). 0.02% THD+N distortion @ 5W, 4 Ohms. Residual noise 250 µV, IHF-A weighted, AES-17 filter. 96% Efficiency @ 35W, 4 Ohms, Class-D Stage. OCP, OVP, UVP and OTP. Self-oscillating half-bridge topology. Featuring IR4311 PowIRaudio™ integrated Class D IC.
      • IR4311M
      active and preferred
      IRAUDAMP18 35 W x 2 channels, (THD=10%, 1kHz, 4 Ohms). 0.018% THD+N distortion @ 3W, 4 Ohms. Residual noise 180 µV, IHF-A weighted, AES-17 filter. 96% Efficiency @ 35W, 4 Ohms, Class-D Stage. OCP, OVP, UVP and OTP. Self-oscillating half-bridge topology. Featuring IR4312 PowIRaudio™ integrated Class D IC.
      • IR4312M
      active and preferred
      IRAUDAMP21 Output Power: 90W x 2 channels (10%THD+N 2Ohms load no heatsink). 135W x 2 channels (10%THD+N 2Ohms load *with heatsink),. Multiple Protection Features: Over-current protection (OCP), high and low side. Over-voltage protection (OVP),. Under-voltage protection (UVP), high and low side. DC-protection (DCP),. Over-temperature protection (OTP). PWM Modulator: Self-oscillating half-bridge topology with optional clock synchronization.
      • IR4321M
      active and preferred
      IRAUDAMP22 Output Power 50W x 2 channels (10%THD+N 2Ohms load no heatsink). 100W x 2 channels (10%THD+N 2Ohms load *with heatsink),. Multiple Protection Features: Over-current protection (OCP), high and low side. Over-voltage protection (OVP),. Under-voltage protection (UVP), high and low side. DC-protection (DCP),. Over-temperature protection (OTP). PWM Modulator: Self-oscillating half-bridge topology with optional clock synchronization.
      • IR4322M
      active and preferred
      IRAUDAMP10 300 W x 2 channels, (THD=1%, 1kHz, 4 Ohms). 0.008% THD+N distortion @ 100W, 4 Ohms. Residual noise 220 µV, IHF-A weighted, AES-17 filter. 90% Efficiency @ 300W, 4 Ohms, Class-D Stage. OCP, OVP, UVP and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IRS2052M Controller and Gate Driver IC and IRF6775 DirectFET MOSFETs.
      • IRS2052M
      active and preferred
      IRAUDAMP5 120W x 2 Channels (THD=1%, 1kHZ). 0.005% THD+N @ 60W, 4 Ohms. 170 µV Distortion, IHF-A weighted, AES-17 filter. 96% Efficiency @ 120W, 4 Ohms, Single Channel Driven, Class-D Stage. OCP, OVP, UVP, DC protection and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IRS2092S Controller and Gate Driver IC and IRF6645 DirectFET MOSFETs.
      • IRS2092SPBF
      active and preferred
      IRAUDAMP7D 250 W x 2 channels, (THD=1%, 1kHz, 4 Ohms). 0.05% THD+N distortion @ 120W, 4 Ohms. Residual noise 200 µV, IHF-A weighted, AES-17 filter. All through-hole components on single layer PCB. OCP, OVP, UVP, DC protection and OTP. Half bridge/ full bridge selector. Featuring IRS2092 Gate Driver IC and IRFI4019H-117P MOSFETs.
      • IRS2092SPBF
      active and preferred
      IRAUDAMP7S 250 W x 2 channels, (THD=1%, 1kHz, 4 Ohms). 0.01% THD+N distortion @ 120W, 4 Ohms. Residual noise 200 µV, IHF-A weighted, AES-17 filter. Single layer PCB. OCP, OVP, UVP, DC protection and OTP. Half bridge/ full bridge selector. Featuring IRS2092S Gate Driver IC and IRFI4019H-117P MOSFETs.
      • IRS2092SPBF
      active and preferred
      IRAUDAMP9 1700 W Single channel (2Ohms load THDN=10%, 1kHz). 1% THD+N distortion @ 1200W, 2 Ohms +/-75V. Residual noise 290 µV, IHF-A weighted, AES-17 filter. 94% efficiency @ 1200W, 2 Ohms, Single Channel Driven, Class-D Stage. OCP, OVP, UVP, DC protection, HOPS ( High Output peak Shutdown Protection) and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IRS2092S Gate Driver ( with external BJT buffering ) and IRFB4227PBF 200V MOSFETs.
      • IRS2092SPBF
      active and preferred
      IRAUDAMP8 120 W x 4 channels, (THD=1%, 1kHz, 4 Ohms). 0.015% THD+N distortion @ 60W, 4 Ohms. Residual noise 200 µV, IHF-A weighted, AES-17 filter. 90% Efficiency @ 120W, 4 Ohms, Class-D Stage. OCP, OVP, UVP and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IRS2093M Controller and Gate Driver IC and IRF6665 DirectFET MOSFETs.
      • IRS2093MPBF
      active and preferred
      IRAUDAMP4A 120 W x 2 channels, (THD=1%, 1kHZ). 0.004% THD+N distortion @ 60W, 4 Ohms. Residual noise 52 µV, IHF-A weighted, AES-17 filter. 96% efficiency @ 120W, 4 Ohms, Single Channel Driven, Class-D Stage. OCP, OVP, UVP, DC protection and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IRS20957S Gate Driver and IRF6645 DirectFET MOSFETs.
      • IRS20957SPBF
      active and preferred
      IRAUDAMP6 250 W x 2 channels (8 Ohms load THD=1%, 1kHZ). 0.005% THD+N distortion @ 125W, 8 Ohms. Residual noise 90 µV, IHF-A weighted, AES-17 filter. 96% efficiency @ 250W, 8 Ohms, Single Channel Driven, Class-D Stage. OCP, OVP, UVP, DC protection and OTP. Self-oscillating half-bridge topology with optional clock synchronization. Featuring IRS20957S Gate Driver and IRF6785 DirectFET MOSFETs.
      • IRS20957SPBF
      active and preferred
      IRPLCFL8U Featuring IRS2530D DIM8™ HVIC ballast controller . Drives 1 x 32W Spiral CFL Lamp. Input Voltage: 120Vac. High Frequency Operation. Lamp Filament Preheating. Lamp Fault Protection with Auto-Restart. Low AC Line/Brownout Protection.
      • IRS2530DPBF
      active
      IRPLDIM4E Featuring IRS2530D DIM8™ HVIC ballast controller . Closed-loop dimming control. Programmable preheat time. Frequency sweep for filament preheat and lamp ignition. Open filaments and no-lamp protection. Failure to strike and deactivated-lamp protection. Low AC line protection. Lamp exchange auto restart.
      • IRS2530DPBF
      active
      IRPLDIM5E Featuring IRS2530D DIM8™ HVIC ballast controller . Drives 25-26W CFL Lamp. Input Voltage: 220Vac. High Frequency Operation. Lamp Filament Preheating. Lamp Fault Protection with Auto-Restart. Low AC Line/Brownout Protection. Microcontroller driven 4 level power pulse dimming.
      • IRS2530DPBF
      active
      IRPLHID2A Featuring IRS2573DSPbF HID Ballast Control IC. Drives 1 x 70W HID lamp. Input voltage range: 185-265 VAC. High Power Factor / Low Total Harmonic Distortion. Controlled ignition. Low frequency square wave operation. Lamp power and current control. Open circuit and no-lamp protection. Short circuit and lamp failure to warm-up protection. Lamp end-of-life shutdown.
      • IRS2573DSPBF
      active
      CDM10V_PRG_BOARD LED Driver & Ballast Controller Configuration Board for CDM10V
      • CDM10V_PRG_BOARD
      active and preferred
      CDM10V_DEMO_BOARD LED Driver & Ballast Controller Demonstration Board for CDM10V and ICL8105
      • CDM10V_DEMO_BOARD
      active and preferred
      BCR450 BOARD LED Driver & Ballast Controller Drive high-power LEDs (1W, 3W) with the BCR 450 - Max. supply voltage: 27V - BCR 450 + 3 different transistors for currents up to 2A>- BAS 3007A-RPP Schottky Diode for Reverse Polarity Protection - Can be connected to a string of LEDs - PWM signal can be applied
        on request
        EVAL ICB2FL01G LED Driver & Ballast Controller Evaluation board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL01G for 1x54W T5 lamp.
        • ICB 2FL01G
        active and preferred
        EVAL ICB2FL02G LED Driver & Ballast Controller Evaluation board for dimmable fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x26W TC-TEL lamp.
        • ICB 2FL02G
        active and preferred
        KIT_XMCI45_LARIX_PINU_1 Quadrocopter demonstrator kit with 9-axis motion tracking, pressure sensor and authentication representation. Control via Bluetooth or radio transmitter.
          coming soon
          BCR320U HW LED BOARD LED Driver & Ballast Controller The BCR 320U is the only dedicated 0.5W LED driver on the market. BCR 320U demoboard features: 24V supply voltage Constant LED current of 150mA BAS 007A-RPP Schottky diode for reverse polarity protection- 6 x 0.5W LEDs, type: OSRAM Advanced Power Topled
            active and preferred
            BCR402W 12V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions - 12V supply voltage, 20mA preset LED current  - Footprint for external resistor for adjusting LED current - Footprint for Schottky diodes (can be replaced by jumpers) - 3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG
              on request
              BCR402W 24V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions - 12V supply voltage, 20mA preset LED current  - Footprint for external resistor for adjusting LED current - Footprint for Schottky diodes (can be replaced by jumpers) - 6 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG
                on request
                DEMOBOARD TLD5095EL VER1 LED Driver & Ballast Controller 1. Boost to GND (default) 2. SEPIC (external components arrangement must be modified) 3. Constant Voltage Mode (external components arrangement must be modified)
                • TLD5095EL
                on request
                DEMOBOARD TLD5095EL VER2 LED Driver & Ballast Controller 1. Boost to Battery Voltage – B2B (default) 2. Constant Voltage Mode (external components arrangement must be modified)
                • TLD5095EL
                on request
                DEMOBOARD TLD5045EJ LED Driver & Ballast Controller Buck mode
                • TLD5045EJ
                on request
                EVAL ICB2FL03G LED Driver & Ballast Controller Evaluation board for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL03G
                • ICB 2FL03G
                active and preferred
                APPBOARD TLD5098EL V5 LED Driver & Ballast Controller Boost to Ground Configuration with Short to Ground Protection with EMC filter.
                • TLD5098EL
                on request
                APPBOARD TLD5098EL V6 LED Driver & Ballast Controller Boost to Battery Configuration with EMC filter
                • TLD5098EL
                on request
                APPBOARD TLD5098EL V7 SEPIC Configuration with EMC filter
                • TLD5098EL
                on request
                APPBOARD TLD5098EL VER1 LED Driver & Ballast Controller Constant Voltage Mode
                • TLD5098EL
                on request
                APPBOARD TLD5098EL VER2 LED Driver & Ballast Controller Boost to Ground Configuration with Short to Ground Protection
                • TLD5098EL
                on request
                APPBOARD TLD5098EL VER3 LED Driver & Ballast Controller Boost to Battery Configuration
                • TLD5098EL
                on request
                APPBOARD TLD5098EL VER4 LED Driver & Ballast Controller SEPIC Configuration
                • TLD5098EL
                on request
                EVALLED-ILD6070 LED Driver & Ballast Controller Evaluation board for high-power LEDs at EVALLED-ILD6070DC voltage input using ILD6070
                  active and preferred
                  EVALLED-ILD6150 LED Driver & Ballast Controller Evaluation board for high-power LEDs at EVALLED-ILD6150DC voltage input using ILD6150
                    active and preferred
                    DEMOBOARD TLE4242G LED Driver & Ballast Controller Constant current source
                    • TLE4242G
                    on request
                    EVALLED-ICL8002G-B1 LED Driver & Ballast Controller Evaluation board for dimmable 13W LED bulb in isolated flyback topology
                      active and preferred
                      EVALLED-ICL8002G-B2 LED Driver & Ballast Controller Evaluation board for dimmable 12W LED bulb in non-isolated buck topology
                        active and preferred
                        EVALLED-ICL8002G-B3 LED Driver & Ballast Controller Evaluation board for dimmable 20W LED PAR38 in isolated flyback topology
                          active and preferred
                          DEMOBOARD TLD1125EL 1 in/1 out - PWMI and Open load and Short Circuit diagnosis
                          • TLD1125EL
                          on request
                          DEMOBOARD TLD1121EL LED Driver & Ballast Controller 1 in/1 out - Open Load and Short Circuit diagnosis
                          • TLD1121EL
                          on request
                          DEMOBOARD TLD1124EL LED Driver & Ballast Controller 1 in/1 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function
                          • TLD1124EL
                          on request
                          DEMOBOARD TLD1311EL LED Driver & Ballast Controller 1 in/3 out - N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel)
                          • TLD1311EL
                          on request
                          DEMOBOARD TLD1313EL LED Driver & Ballast Controller 1 in/3 out - Open Load and Short Circuit diagnosis
                          • TLD1313EL
                          on request
                          DEMOBOARD TLD1314EL LED Driver & Ballast Controller 1 in/3 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function
                          • TLD1314EL
                          on request
                          DEMOBOARD TLD1315EL LED Driver & Ballast Controller 1 in/3 out - PWMI and N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel)
                          • TLD1315EL
                          on request
                          DEMOBOARD TLD1326EL LED Driver & Ballast Controller 1 in/3 out - Matrix configuration and PWMI and N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel)
                          • TLD1326EL
                          on request
                          DEMOBOARD TLD2311EL LED Driver & Ballast Controller 3 in/3 out - Matrix configuration and Open Load and Short Circuit diagnosis
                          • TLD2311EL
                          on request
                          DEMOBOARD TLD2314EL LED Driver & Ballast Controller 3 in/3 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function
                          • TLD2314EL
                          on request
                          DEMOBOARD TLE4242EJ LED Driver & Ballast Controller Constant current source
                          • TLE4242EJ
                          on request

                          Lighting ICs & Audio Driver ICs

                          Self Service

                          Infineon welcomes your comments and questions.

                          If you have any questions concerning our products, please fill out the following form. Your inquiry will be sent to the appropriate specialist who will be in touch with you as soon as possible.

                          You will receive a confirmation E-mail to validate your address in our system. Any attached file to the reply which will help to support your inquiry is highly appreciated.

                          I agree that my personal data mentioned above (including my e-mail address and phone number) can be gathered, processed and used for sales promotion and market research by Infineon Technologies AG and its licensed distribution partners.

                          For more information about our privacy policy please click on Privacy Policy

                          Where to buy

                          Please use our location finder to get in contact with your nearest Infineon distributor or sales office

                          Find a location

                          Ask Infineon