ISOFACE™ Digital Input ICs

  • Products
  • Highlights
  • Documents
  • Boards
  • Simulation
  • Videos
  • Forums
  • Support
  • Software & Tools
  • Sales Insight

ISOFACE™ Digital Input ICs

ISOFACE™ Galvanically Isolated Digital Input ICs ISO1I811T, ISO1I813T

Complete Integration:

The ISOFACE™ ISO1I81xT product family (ISO1I811T, ISO1I813T) of galvanically isolated 8-channel digital input ICs sample input data from digital sensors and switches. The digital input ICs can be directly connected to digital inputs like sensors or switches and the micro-controller or bus-ASIC. Robust galvanic isolation is integrated.


8 Input Channels:

Up to 8 inputs according to IEC61131-2 (Type 1/2/3) can be connected per IC. The precise characteristic of the current sink of the IC’s inputs reduces the power dissipation per channel by a factor of up to 2.5-times compared to solutions using resistors and opto-couplers. In consequence, more compact designs of input card solutions become possible with ISOFACE™.


Deglitching Filters:

To improve EMI robustness of the system solution, the 8 input channels are equipped with adjustable deglitching filters. In case of the ISO1I811T, jumpers on the PCB can be used to select one of the four possible settings. The ISO1I813T allows to individually program the filter setting for each of the channels.

Bypass mode, i.e. zero filter time, is offered with both types.


High Sampling Speeds:

The ISOFACE™ Digital Input ICs support sampling speeds of up to 500 kHz per input channel, substantially exceeding the speed of solutions using opto-couplers. Therefore, they are ideally suited for high-precision or high-speed applications like bottling machines or paper and printing industries.


A feature only available with the ISO1I813T is the capability to synchronously capture the input signals from multiple input ICs. This is of particular practical relevance when an isochronous time-stamp of the status of a complex machine or equipment is required.


Flexible Interfaces:

The micro-controller or bus-ASIC can be connected either via a high-speed SPI Interface or using a parallel 8-bit interface to the ICs. To support very compact system designs daisy-chaining of multiple ISOFACE TM Digital Input ICs is supported.

To ensure uncompromised data-transfer with the micro-controller the ISO1I813T supports CRC-checking of the serial communication.


Galvanic Isolation:

The ISOFACE™ digital input ICs offer a robust integrated galvanic isolation of 500VAC (EN60664-1, UL508). When compared with alternative solutions, ISOFACE™ Digital Input ICs enable up to four times more channels on the same PCB area. This high level of integration density combined with the low power consumption is a key enabler for highly compact industrial control products.


Comprehensive diagnostics:

The diagnostic capabilities of the ISO1I813T includes the detection of a wire-break between the IC`s inputs and the sensors or switches connected to it. When such error is detected, the micro-controller or bus-ASIC can identify the individual channel. 

Furthermore, the device’s supply voltage (Vbb missing voltage) is being monitored. When Vbb missing voltage is diagnosed, the error pin indicates that the input data collected is not valid.

The ISO1I813T can even issue a pre-warning, if Vbb is falling below a pre-warning limit (Vbb under-voltage). This allows, for example, the system to assume a different mode of operation or to safely shut down.

Monitoring wire-break and Vbb greatly improves the factory level maintenance thus providing a significant contribution to minimize costly un-scheduled machine down-times.


Key Features:

  • Complete system integration (digital sensor or switch input, galvanic isolation and intelligent micro-controller or bus-ASIC interface)

  • 8-channel input according to IEC61131-2 (Type 1/2/3) 

  • Integrated galvanic isolation 500VAC (EN60664-1, UL508) 

  • 3.3V SPI and parallel micro-controller interface 

  • Adjustable deglitching filters

  • Up to 500 kHz sampling frequency 

  • Wire-break detection 

  • Vbb under-voltage detection

  • Package: TSSOP 8 x 12.5 mm

ISOFACE™ Digital Input ICs

Product Brief

Title Size Date Version
159 KB 08 Feb 2016 01_00
272 KB 22 Jan 2014 01_02
574 KB 28 Jan 2012
949 KB 28 Oct 2014 01_00

Application Notes

Title Size Date Version
1.5 MB 08 Sep 2011 01_02
1.8 MB 08 Sep 2011 01_00
367 KB 02 Mar 2010
360 KB 02 Mar 2010
366 KB 02 Mar 2010
375 KB 02 Mar 2010

Additional Product Information

Title Size Date Version
179 KB 15 Jun 2015 01_00

ISOFACE™ Digital Input ICs

Self Service

Infineon welcomes your comments and questions.

If you have any questions concerning our products, please fill out the following form. Your inquiry will be sent to the appropriate specialist who will be in touch with you as soon as possible.

You will receive a confirmation E-mail to validate your address in our system. Any attached file to the reply which will help to support your inquiry is highly appreciated.

I agree that my personal data mentioned above (including my e-mail address and phone number) can be gathered, processed and used for sales promotion and market research by Infineon Technologies AG and its licensed distribution partners.

For more information about our privacy policy please click on Privacy Policy

Where to buy

Please use our location finder to get in contact with your nearest Infineon distributor or sales office

Find a location

Ask Infineon

ISOFACE™ Digital Input ICs