Lighting ICs & Audio Driver ICs

 
  • Products
  • Highlights
  • Documents
  • Boards
  • Simulation
  • Videos
  • Forums
  • Support
  • Software & Tools

Lighting ICs & Audio Driver ICs

Smart Lighting and Power Conversion

 Infineon delivers innovative, high-performance solutions with best-in-class technologies that can be used in a broad range of lighting applications.

 

 



ifx-banner-energy-eficiency-175x150 IFX_Website-Button_dp-01 IFX_UrbanFarming_Banner

NEW! Power Management Selection Guide 2016

Mobile App

appstore

 

googleplay


Lighting ICs & Audio Driver ICs


IFX_Website-Button_dp-01


Lighting ICs & Audio Driver ICs

Application Notes

Title Size Date Version
125 KB 27 Oct 2004
425 KB 27 Oct 2004
147 KB 18 Jun 2001
100 KB 26 May 2006
773 KB 23 Feb 2007

Product Selection Guide

Title Size Date Version
4.7 MB 22 Feb 2016 00_00

Product Brief

Title Size Date Version
168 KB 01 Mar 2016 01_00
568 KB 20 Oct 2011
386 KB 26 Apr 2016 01_00
435 KB 20 Oct 2011

Application Brochure

Title Size Date Version
3.3 MB 01 Mar 2016 01_00
3.1 MB 23 Oct 2014 01_00
1.7 MB 23 Sep 2014 01_00

Additional Product Information

Title Size Date Version
74 KB 22 Mar 2016 01_00
75 KB 22 Mar 2016 01_00

Lighting ICs & Audio Driver ICs

Evaluation Boards

Board Family Description Status
EVALLEDICL5101E1 LED Driver & Ballast Controller 110W / 54V Power Supply Demoboard using ICL5101 in PFC & LLC Resonant Topology
  • ICL5101
active and preferred
EVALLEDICL8201F1 LED Driver & Ballast Controller 7.5W 180mA Single Stage Floating Buck (GU10) Converter with ICL8201
  • ICL8201, IPU50R3K0CE
active and preferred
EVALLEDICL8201F2 LED Driver & Ballast Controller 18W 270mA Single Stage Floating Buck LED (Single End Cap T8) Converter with ICL8201
  • ICL8201, IPS65R1K5CE
active and preferred
IF-BOARD.DP-GEN2 Interface Boards Galvanic isolated and CE certified .dp InterfaceGen2, which is used to set parameters and protection behavior for digital power products. I can be used to either test parameter temporarily or to burn them permanently. The .dp device will be connected via USB to a computer and is controlled using the .dp Vision Software. Application Addon packages are necessary for the dedicated products. They can be found in the download section for e.g. ICL8105 or ILD2111.
    active and preferred
    EVALLEDICL8105E1 LED Driver & Ballast Controller 20 - 80W universal evaluation system for LED driver with contant current output based on the ICL8105 digital single-stage flyback controller and 800V CoolMOS™
    • ICL8105
    active and preferred
    EVALLEDICL8105F2 LED Driver & Ballast Controller 40W LED driver demoboard with isolated 0 - 10 V dimming interface using the ICL8105 digital flyback controller and 800V CoolMOS™
    • ICL8105
    active and preferred
    EVALLEDILD2111E1 LED Driver & Ballast Controller 20W evaluation system for DCDC LED driver using the ILD2111 digital buck controller and 75V OPTIMOS™ transistor
    • ILD2111
    active and preferred
    CDM10V_PRG_BOARD LED Driver & Ballast Controller Configuration Board for CDM10V
    • CDM10V_PRG_BOARD
    coming soon
    CDM10V_DEMO_BOARD LED Driver & Ballast Controller Demonstration Board for CDM10V and ICL8105
    • CDM10V_DEMO_BOARD
    coming soon
    BCR450 BOARD LED Driver & Ballast Controller Drive high-power LEDs (1W, 3W) with the BCR 450
    - Max. supply voltage: 27V
    - BCR 450 + 3 different transistors for currents up to 2A
    - BAS 3007A-RPP Schottky Diode for Reverse Polarity Protection 
    - Can be connected to a string of LEDs
    - PWM signal can be applied
    • BCR 450
    on request
    EVAL ICB2FL01G LED Driver & Ballast Controller Evaluation board for fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL01G for 1x54W T5 lamp.
    • ICB 2FL01G
    active and preferred
    EVAL ICB2FL02G LED Driver & Ballast Controller Evaluation board for dimmable fluorescent lamp ballast with smart ballast controller 2nd generation ICB 2FL02G for 1x26W TC-TEL lamp.
    • ICB 2FL02G
    active and preferred
    KIT_XMCI45_LARIX_PINU_1 Quadrocopter demonstrator kit with 9-axis motion tracking, pressure sensor and authentication representation. Control via Bluetooth or radio transmitter.
      coming soon
      BCR320U HW LED BOARD LED Driver & Ballast Controller The BCR 320U is the only dedicated 0.5W LED driver on the market.
      BCR 320U demoboard features:
      - 24V supply voltage
      - Constant LED current of 150mA
      - BAS 3007A-RPP Schottky diode for reverse polarity protection
      - 6 x 0.5W LEDs, type: OSRAM Advanced Power Topled +
      • BCR 320U
      active and preferred
      MR16 3W BOARD LED Driver & Ballast Controller Drive 3 x 1W LED Halogen replacement (MR16) lamps with this ready-to-use reference design
      - equipped with ILD 4035 for 350mA LED current
      - 12V DC or AC supply voltage
      - 4 BAS 3010A Schottky diodes for reverse polarity protection
      - Including typical MR16 socket pins for instant use in existing designs.
      • ILD 4035
      on request
      ILD4035 12V BOARD LED Driver & Ballast Controller Drive 1W LEDs with the buck LED driver ILD 4035
      - 24V and 12V supply voltage version available
      - 350mA preset LED current
      - Analog voltage and PWM pin for dimming
      - Can be connectec to a string of 1W LEDs
      • ILD 4035
      active and preferred
      ILD4035 24V BOARD LED Driver & Ballast Controller Drive 1W LEDs with the buck LED driver ILD 4035
      - 24V and 12V supply voltage version available
      - 350mA preset LED current
      - Analog voltage and PWM pin for dimming
      - Can be connectec to a string of 1W LEDs
      • ILD 4035
      active and preferred
      BCR402W 24V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions
      - 24V supply voltage, 20mA preset LED current
      - Footprint for external resistor for adjusting LED current
      - Footprint for Schottky diodes (can be replaced by jumpers)
      - 6 x 0.2W LEDs in series, type: OSRAM TopLED LWT6SG
      • BCR 402W
      on request
      BCR402W 12V LED BOARD LED Driver & Ballast Controller The BCR 402W is an ideal drop-in replacement for resistor-based channel letter solutions
      - 12V supply voltage, 20mA preset LED current 
      - Footprint for external resistor for adjusting LED current
      - Footprint for Schottky diodes (can be replaced by jumpers)
      - 3 x 0.2W LEDs in series, type: OSRAM TopLED LW T6SG
      • BCR 402W
      on request
      DEMOBOARD TLD5095EL VER1 LED Driver & Ballast Controller 1. Boost to GND (default) 2. SEPIC (external components arrangement must be modified) 3. Constant Voltage Mode (external components arrangement must be modified)
      • TLD5095EL
      on request
      DEMOBOARD TLD5095EL VER2 LED Driver & Ballast Controller 1. Boost to Battery Voltage – B2B (default) 2. Constant Voltage Mode (external components arrangement must be modified)
      • TLD5095EL
      on request
      DEMOBOARD TLD5045EJ LED Driver & Ballast Controller Buck mode
      • TLD5045EJ
      on request
      EVAL ICB2FL03G LED Driver & Ballast Controller Evaluation board for 54W T5 single fluorescent lamp design with voltage mode preheating using ICB2FL03G
      • ICB 2FL03G
      active and preferred
      MR16 10W BOARD LED Driver & Ballast Controller Control board for 10W MR16 low voltage halogen replacement lamps
      • ILD4001 + BSR302N
      active and preferred
      MR16 7W BOARD LED Driver & Ballast Controller Control board for 7W MR16 low voltage halogen replacement lamps
      • ILD4001 + BSR302N
      active and preferred
      ILD4120 BOARD LED Driver & Ballast Controller Drive 3W LEDs with the buck LED driver ILD 4120
      - 24V and 12V supply voltage version available
      - 700mA preset LED current
      - Analog voltage and PWM pin for dimming
      - Can be connected to a string of 3W LEDs
      • ILD 4120
      on request
      APPBOARD TLD5098EL V5 LED Driver & Ballast Controller Boost to Ground Configuration with Short to Ground Protection with EMC filter.
      • TLD5098EL
      on request
      APPBOARD TLD5098EL V6 LED Driver & Ballast Controller Boost to Battery Configuration with EMC filter
      • TLD5098EL
      on request
      APPBOARD TLD5098EL V7 SEPIC Configuration with EMC filter
      • TLD5098EL
      on request
      APPBOARD TLD5098EL VER1 LED Driver & Ballast Controller Constant Voltage Mode
      • TLD5098EL
      on request
      APPBOARD TLD5098EL VER2 LED Driver & Ballast Controller Boost to Ground Configuration with Short to Ground Protection
      • TLD5098EL
      on request
      APPBOARD TLD5098EL VER3 LED Driver & Ballast Controller Boost to Battery Configuration
      • TLD5098EL
      on request
      APPBOARD TLD5098EL VER4 LED Driver & Ballast Controller SEPIC Configuration
      • TLD5098EL
      on request
      EVALLED-ILD6070 LED Driver & Ballast Controller ILD6070 60V/0.7A Highly Efficient Step Down LED Driver with Adjustable Thermal Protection
      • ILD6070
      active and preferred
      EVALLED-ILD6150 LED Driver & Ballast Controller ILD6150 60V/1.5A Highly Efficient Step Down LED Driver with Adjustable Thermal Protection
      • ILD6150
      active and preferred
      DEMOBOARD TLE4242G LED Driver & Ballast Controller Constant current source
      • TLE4242G
      on request
      EVALLED-ICL8002G-B1 LED Driver & Ballast Controller Evaluation board for dimmable 13W LED bulb in isolated flyback topology
      • ICL8002G
      active and preferred
      EVALLED-ICL8002G-B2 LED Driver & Ballast Controller Evaluation board for dimmable 12W LED bulb in non-isolated buck topology
      • ICL8002G
      active and preferred
      EVALLED-ICL8002G-B3 LED Driver & Ballast Controller Evaluation board for dimmable 20W LED PAR38 in isolated flyback topology
      • ICL8002G
      active and preferred
      DEMOBOARD TLD1125EL 1 in/1 out - PWMI and Open load and Short Circuit diagnosis
      • TLD1125EL
      on request
      DEMOBOARD TLD1121EL LED Driver & Ballast Controller 1 in/1 out - Open Load and Short Circuit diagnosis
      • TLD1121EL
      on request
      DEMOBOARD TLD1124EL LED Driver & Ballast Controller 1 in/1 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function
      • TLD1124EL
      on request
      DEMOBOARD TLD1311EL LED Driver & Ballast Controller 1 in/3 out - N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel)
      • TLD1311EL
      on request
      DEMOBOARD TLD1313EL LED Driver & Ballast Controller 1 in/3 out - Open Load and Short Circuit diagnosis
      • TLD1313EL
      on request
      DEMOBOARD TLD1314EL LED Driver & Ballast Controller 1 in/3 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function
      • TLD1314EL
      on request
      DEMOBOARD TLD1315EL LED Driver & Ballast Controller 1 in/3 out - PWMI and N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel)
      • TLD1315EL
      on request
      DEMOBOARD TLD1326EL LED Driver & Ballast Controller 1 in/3 out - Matrix configuration and PWMI and N-1 (N-1 can disable all output stages of all connected Basic LED Driver ICs during an open load event on one channel)
      • TLD1326EL
      on request
      DEMOBOARD TLD2311EL LED Driver & Ballast Controller 3 in/3 out - Matrix configuration and Open Load and Short Circuit diagnosis
      • TLD2311EL
      on request
      DEMOBOARD TLD2314EL LED Driver & Ballast Controller 3 in/3 out - Open Load and Short Circuit diagnosis, w/ diagnosis enable function
      • TLD2314EL
      on request
      DEMOBOARD TLE4242EJ LED Driver & Ballast Controller Constant current source
      • TLE4242EJ
      on request

      Lighting ICs & Audio Driver ICs

      Infineon welcomes your comments and questions.

      If you have any questions concerning our products, please fill out the following form. Your inquiry will be sent to the appropriate specialist who will be in touch with you as soon as possible.

      You will receive a confirmation E-mail to validate your address in our system. Any attached file to the reply which will help to support your inquiry is highly appreciated.

      I agree that my personal data mentioned above (including my e-mail address and phone number) can be gathered, processed and used for sales promotion and market research by Infineon Technologies AG and its licensed distribution partners.

      For more information about our privacy policy please click on Privacy Policy

      Where to buy

      Please use our location finder to get in contact with your nearest Infineon distributor or sales office

      Find a location

      Ask Infineon